Edirol 4-CHANNEL V-4 - Manual (Page 40)

40
Editing the front panel assignments
Editing the front panel assignments
As explained earlier, the functions assigned to the buttons and dials of the V-4 can be stored in
memory and accessed via the memory dial (MEMORY). (Note: The assignment for dial position
number 1 is fixed at the factory and not assignable.) You can edit and save the assignments of the
following buttons and dials:
• Output fade dial
• Mix button (MIX)
• Wipe button (WIPE)
• EFX button (EFX)
• BPM sync button (BPM SYNC)
• Channel A effect buttons (four buttons)
• Channel B effect buttons (four buttons)
• Channel A transformer buttons (TRANSFORMER)
• Channel B transformer buttons (TRANSFORMER)
Settings and menu information is displayed on the TV monitor connected to the preview output.
If you need to change settings, the operation can be executed by viewing the information and menu
displayed on the preview monitor. You can change settings by using the following buttons.
Menu Button (MENU)
When pressed, the button lights up and the menu is displayed on the preview monitor.
Cursor Buttons( )
These buttons are used to select desired menu and to change value.
Enter Button (ENTER)
Where there are multiple setting menus under the top menu, this button can be pressed to select
the subsequent menu. If you need to return to the upper level menu, press Menu Button.
V-4_e.book 40 ページ ２０１０年３月１１日 木曜日 午後１時５１分