Edirol 4-CHANNEL V-4 - Manual (Page 60)

60
Control the V-4 from an external device
■
MIDI settings
You will need to make settings on the V-4 so that it will receive control messages from an external
MIDI device. The procedure is as follows.
■
Setting the MIDI transmit channel (MIDI Tx Channel)
This setting specifies the MIDI channel that will be used to send control messages.
1. Press the menu button (MENU).
Press the menu button to display the V-4 menu on the preview screen.
2. Select “MIDI Setup.”
Use the cursor buttons to select “MIDI Setup.” Press the enter button (ENTER) to enter the MIDI
setting screen.
3. Select “MIDI Tx Channel.”
Use the cursor buttons to select “MIDI Tx Channel.” Press the enter button (ENTER) to enter the
transmit channel setting screen.
4. Specify the transmit channel.
Use the cursor buttons to select the transmit channel.
5. Return to the previous screen.
When you have finished making settings, press the menu button to return to the previous screen.
If you press the button three times, you will exit the menu screens and return to the previous
screen.
V-4_e.book 60 ページ ２０１０年３月１１日 木曜日 午後１時５１分