Edirol 4-CHANNEL V-4 - Manual (Page 32)

32
Changing the color of the image
6. Turn the control dial.
Turn the control dial. The brightness and color of the image will be inverted to a negative.
7. Turn the effect off
Press the button again to turn the effect off.
Applying the Colorize effect
Here’s how to apply the Colorize effect to the image being input to channel A. The “Colorize” effect
colors the image to produce a paint-like impression.
1. Set the memory dial (MEMORY) to 1.
Turn the dial all the way to the left to select the 1 position.
2. Play back the image to which you want to apply the effect.
Play back the image that you want to colorize, and input it to the V-4.
3. Select the input for channel A.
Input the image being played back into channel A. Use the channel A input select buttons to make
your choice.
4. Move the video fader to channel A.
To output the image of channel A, move the video fader to channel A.
5. Press the COLORIZE button.
Press the channel A “COLORIZE” button. This is the third effect button from the top on the channel
A side.
6. Turn the control dial.
Turn the control dial. The colorize parameters will be adjusted to change the way in which the
image is colored.
7. Turn the effect off
Press the button again to turn the effect off.
V-4_e.book 32 ページ ２０１０年３月１１日 木曜日 午後１時５１分