Checking the inputs and outputs, Checking the final output, Checking the output to the preview monitor – Edirol 4-CHANNEL V-4 User Manual
Page 20
20
Checking the inputs and outputs
Checking the inputs and outputs
Checking the final output
Here’s how to check that the signal from each source device is correctly being input to the V-4, and
is correctly being output to the TV or projector as final output.
1.
Play back the source device.
Operate the source device (e.g., camcorder, VCR, DVD player, DV-7PR) connected to the V-4 so
that it will output video.
2.
Check the output monitor.
Power-on the TV monitor or projector that is connected to the output jack of the V-4, and verify that
the image being output from the V-4 is displayed correctly.
3.
Switching the input channel
Now, try switching the V-4’s input channel. Move the T-bar all the way toward the channel A or
channel B position. If you moved the T-bar toward channel A, press the left input selector (INPUT
SELECT). If you moved the T-bar toward channel B, press the right input selector. Successively
press buttons 1 through 4 to switch inputs. Confirm that the image shown on your TV monitor or
projector changes accordingly.
Checking the output to the preview monitor
Next, you should check whether the image is being correctly output to the preview TV monitor.
1.
Play back your source device
Operate the source device (e.g., camcorder, VCR, DVD player, DV-7PR) connected to the V-4 so it
outputs video.
2.
Check the preview output
Turn on the power of the TV monitor that is connected to the preview output jack of the V-4, and
verify that the image output from the V-4 is displayed correctly.
In the case you do not see output on TV/Projector
• Check that outputs from source devices are correctly connected to inputs of V-4.
• Check that output from V-4 is correctly connected to input of TV or Projector.
• Check that input selection of TV or Projector is set correctly.
When the channel selected has no signal input, a blue image is output to the TV/Projector. You can
turn On/Off the blue image output by changing the parameter on p. 75 or later.
V-4_e.book 20 ページ ２０１０年３月１１日 木曜日 午後１時５１分