Edirol 4-CHANNEL V-4 - Manual (Page 42)

42
Editing the front panel assignments
Changing the assignment of the mix button (MIX)
With the factory settings, mix (MIX: dissolve) is assigned to this button for all eight positions of the
memory dial. Here’s how to assign a different type of transition effect to the mix button for one of
the dial positions.
1. Set the memory dial to the number whose settings you want to change.
Set the memory dial to the number (2 through 8) whose settings you want to change.
2. Press the mix button (MIX).
The button lights up when pressed.
3. Press the menu button (MENU).
Press the menu button (MENU) located in the upper left of the panel. The settings edit menu will
appear on the TV screen connected to the preview output.
4. Select “MIX.”
Use the cursor buttons to select “Mix (Trans1).” It will blink when you select it. The memory dial
number you select is displayed following “Mix (Trans1).” If you have selected memory number 2,
this will indicate [Mem2].
5. Press the enter button (ENTER).
Press the enter button (located at the right of the cursor buttons) to make your selection. The
preview screen display will change.
V-4_e.book 42 ページ ２０１０年３月１１日 木曜日 午後１時５１分