Emerson Radio AV101 - Manual (Page 15)

14
Unpacking
Check that you have the following items:
Ÿ Main unit (1).
Ÿ Subwoofer (1).
Ÿ Speakers (5).
Ÿ Remote control (1).
Ÿ Video cable (4 feet x 1).
Ÿ AM loop antenna (1).
Ÿ FM antenna (1).
Ÿ Owner’s Manual (1).
Ÿ Quick Set Up Guide.
Inserting Remote Control
Batteries
You can control the system using the supplied remote.
Insert two batteries by matching the + and - on the
batteries with the markings in the battery compartment.
When using the remote, point it at the remote sensor on
the front panel of this system.
Notes:
Ÿ Do not leave the remote in an extremely hot or humid
place.
Ÿ Do not use a new battery with an old one.
Ÿ Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
Ÿ Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so many cause a
malfunction.
Ÿ If you will not use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Ÿ Use only the size and type of batteries specified.
Ÿ Be sure to follow the correct polarity when installing
the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
Ÿ Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh
ones.
Installation
This section describes how to connect the
system to the speakers, a TV monitor with
audio / video input jacks and other video
components. You cannot connect this system
to a TV monitor which does not have a video
input connector. Be sure to turn off the power
of each component before making the
connections.