Emerson Radio AV101 - Manual (Page 16)

15
Ÿ Stripped cords are touching each other due to
excessive removal of insulation.
Speaker System Connection
Connect the supplied speaker system by matching the
colors of the terminals and those of the cords.
The speaker cables and speaker terminals are
color-coded for easier connection.
Ÿ Connect the Front Left and Right Speakers with
Red/Black cables to the “Main SPEAKERS” Red/Black
terminals on the back panel.
Ÿ Connect the Subwoofer with Green/Black cable to the
“SUB WOOFER” Green/Black terminal on the back
panel.
Ÿ Connect the Center Speaker with Blue/Black cable to
the “CENTER SPEAKER” Blue/Black terminal on the
back panel.
Ÿ Connect the Rear Left and Right speakers with
Gray/Black cables to the “REAR SPEAKERS”
Gray/Black terminals on the back panel.
To avoid short-circuiting the speakers
Ÿ Make sure the stripped end of each speaker cord does
not touch another speaker terminal or the stripped end
of another speaker cord.
Examples of poor connection of the speaker cord
Ÿ Stripped speaker cord is touching another speaker
terminal.