Emerson Radio AV101 - Manual (Page 17)

16
Antenna Connections
Connect the supplied AM/FM antennas for listening to the radio.
Ÿ Connect the AM loop antenna to the AM terminals.
Ÿ Connect the FM antenna to the FM antenna terminal.
Notes:
Ÿ To prevent noise pickup, keep the AM loop antenna away
from the system and other components.
Ÿ Be sure to fully extend the FM antenna.
Ÿ After connecting the FM antenna, keep it as horizontal as
possible.
Tips for connecting antenna and speakers wires
Push and hold Speaker terminal tab down to insert wire.
Release tab to lock wire in terminal. Make sure the
insulation is completely removed from the ends of the
antenna and speaker wires at all connection points.
If you have poor FM reception remove the supplied FM wire
antenna and have a qualified technician connect this
system to a roof mounted antenna.
Notes:
Ÿ If you connect the system to an outdoor antenna,
ground it against lightning.
Ÿ To prevent a gas explosion, do not connect the
ground wire to a gas pipe.