Emerson Radio AV101 - Manual (Page 32)

31
Settings and Adjustments
This chapter explains how to use the SETUP MENU to
adjust various functions and controls. We have preset all
of the functions and controls of this system at our factory to
the preferred settings for the system to be used in North
America. In most cases the original default settings should
not be changed. However you may want to change certain
default settings such as the language for the audio, the on
screen displays, the subtitles, the parental control level,
etc. Follow the instructions in this chapter to change those
settings. Keep in mind that when you change a default
setting your new setting becomes the new default and
remains in the system memory until you either change
that individual setting again, or reset all the defaults to the
original factory settings.
Using the SETUP Menu and
Navigation Buttons (3/4/5/6)
Ÿ The SETUP Menu contains a listing of all of the
optional settings that are included in this home theater
system. They have all been preset to the correct
positions for using the system in North America and
with the 6 speakers which were included when you
purchased this system.
Ÿ Press the SETUP button on the remote control to
access the GENERAL SETUP Page.
Ÿ Press the (5/6) buttons to “highlight” one of the four
pages which appear on the Main Page. And then press
the ENTER button to select the “highlighted”page. The
selected page will appear on the TV screen.
Notes:
Ÿ The Preferences Page cannot be selected while a disc
is playing. If a disc is playing press the SETUP button
again to exit the SETUP Menu page and press the
STOP button to stop playback. Then press the SETUP
button again to reenter the General Setup Page. The
Preferences Page can now be selected.
When the selected page is opened, use the (5/6)
buttons to “highlight”one of the settings on the page. The
options for the “highlighted”setting will appear in the right
column. One of those options will already be “highlighted”
This is the factory default setting. Use the (4) button to
move into the right column, and then use the (5/6)
buttons to scroll up or down to select a new setting. When
the desired setting is “highlighted”, press the ENTER
button to select the “highlighted” setting. This will become
the new default setting.
If you want to change any other settings use the (3) button
to move back to the left column and then use the (5/6)
arrows to select the next item to be changed. If you are
finished making changes press the SETUP button again
to exit the SETUP Menu. The menu page disappears from
the TV screen.