Emerson Radio AV101 - Manual (Page 36)

35
Screen Saver Setting
(SCR Saver)
Path: General Page SCR Saver
Turns the screen saver option on or off.
If you turn the screen saver on, the screen saver image
appears when you leave the system in pause or stop mode
for more than 1 minute. The screen saver is useful to
prevent your display from becoming damaged.
Ÿ ON: Turns the screen saver on.
Ÿ OFF: Turns the screen saver off.
Dolby Digital Setup Page
Dynamic Range Setting
Path: Dolby Digital Setup Dynamic
Default Setting: OFF
In many listening situations, it is objectionable to allow the
sound to become very loud, and thus the loudest sounds
must be compressed downwards in level. Likewise, the
very quiet sounds would be inaudible and must be brought
upwards in level to be heard. Dolby Digital satisfies these
needs through the dynamic range controlling.
Select the dynamic range compression to fit the individual
listening situation of the audience. The variable range is
from, FULL, 3/4 to 1/4, or OFF.
Ÿ FULL: Audio with fully compressed dynamic range.
Ÿ 3/4~1/4: Audio with partially compressed dynamic range.
Ÿ OFF: Audio with uncompressed dynamic range.
Note: The Dynamic Range settings only support Dolby Digital
programs.
Selecting Captions
Path: General Page Captions
Default Setting: Off
Some newer DVD movies include closed captioning for
hearing impaired viewers. In addition to showing the
dialog spoken by the actors on the bottom of the screen,
like subtitles, the captioning feature also describes the
other sounds that are being heard together with the
dialog. For example the captions might show “sound of
explosion”, “window breaking”, “dog barking”, “brakes
screeching”, etc.
The DVD protective sleeve or package will indicate whether
a particular movie includes the captions feature, and in
what languages the captions are available.
To turn the Captions feature on:
1. Press the SETUP button to enter the Setup Menu. Use
the 5/6buttons to select the GENERAL SETUP page
and press the ENTER button.
2. Use the 5/6buttons to select CAPTIONS, then press
the4button to go to the right options list, use the
5/6buttons to select ‘On’, and press the ENTER
button to confirm your selection.
Again, remember that the Captions selector will not have
any effect if the movie you are watching does not include
captions.