Magnum Energy Smart Battery Combiner (ME-SBC) - Manual (Page 4)

1 ©2009 Magnum Energy Inc.
Introduction
1.0 Introduction
The Magnum Smart Battery Combiner TM (ME-SBC TM ) is designed to monitor
and charge a second battery using a portion of the current that is charging
a main battery.
The ME-SBC
TM uses MOSFETs, which is a bidirectional electronic switch, control
circuit that eliminates a signifi cant voltage drop and provides automatic turn
on and off based on adjustable voltage setpoints; allowing different batteries
to be charged from a single charging source and preventing over or under
charging.
1.1 Product Features
• Compatible with 12 or 24 volt Systems
• Very easy install and setup
• Auto-detecting input voltage (12, 24V)
• Transfers up to 25 Amps
• Solenoid drive for ampacity requirement greater than 25 Amps
• Over-temp shutdown
• Wide voltage range allows maximum charging fl exibility
• Adjustable Voltage settings
• Over-current shutdown
• Front panel LED’s for status and troubleshooting
• Reverse polarity protection
Virtually zero voltage loss
Bidirectional charging
Sense lead for long run applications
•
•
•