Parkside PLEM 50 A1 - Manual (Page 84)

81 PLEM 50 A1
GB
The individual values , and the results are shown on the
display .
■ Please note that angular error (no right angles) will lead to incorrect
results. Ensure that the measured distances lie on a plane (align-
ment).
■ To ensure the greatest possible accuracy, you can calculate the
distance of the leg (shortest distance) by means of continuous
measurement. The minimum determined value is automatically
used for the Pythagoras calculation.
■ The measurement can also be greater than 50 m in length, but
will be shown as a two-digit number.
Addition (Plus)
♦ To add two individual values, take a measurement (length, area,
volume) so that the display is showing a value.
♦ Then press the button to start the Addition (Plus) function.
The reading now appears on the display , the reading
shows "+ - - - - - -".
♦ Now take a second measurement (length, area, volume).
The reading is shown on the display as "+ nnnn".
Directly after the second measurement, the individual values ,
and the result are shown on the display .
The addition can be carried out with all units (length, area, volume).
You can also include the measurement results of functions (area,
volume, Pythagoras) in the addition.
Only values in the same units can be added. The fi rst measured
value sets the unit to be used.
If the result of an addition is saved in the measured value memory,
the individual values of the sum are also saved.
IB_100719_PLEM50A1_LB1.indb 81 28.08.14 10:46