Parkside PLEM 50 A1 - Manual (Page 87)

GB
84 PLEM 50 A1
Faults Possible cause Rectifi cation
156
Received signal too
strong
Avoid highly refl ective or mirrored
surfaces.
Find a measurement point that is
less refl ective.
157
Measurement er-
rors or surface too
bright
Darken the measuring surface or
fi nd another surface.
160
Vibrations too
strong
Hold the device still.
Hardware failure
If the icon appears despite repeat-
ed switching on and off , contact
the Customer Service Hotline.
NOTE
► If you cannot solve the problem with the aforementioned solu-
tions, please contact the Service Hotline (see chapter
Service).
IB_100719_PLEM50A1_LB1.indb 84 28.08.14 10:46