Curtis SMPK7834 - Manual (Page 4)

Ⅲ Operations
Power on
Slide the power switch of the player towards the direction of ON for 3 seconds for power on.
Power off
In the power off state, slide the power switch of the player towards the direction of OFF for 3
seconds for power off.
Lock button on/off
In the states of video and music, you can set the lock button as ON to prevent unintended button
error operation.
Button lock: Slide the switch button of the player towards the direction of HOLD, and the button
of the player will be locked up without any response to any operation.
Button lock: Slide the switch button of the player to the original position to unlock and to restore
to the button operation.
Volume Control
In the states of music and video, etc, you can perform volume control using + or – button at the
lower part of the screen. + button is for increased volume and – button is for reduced volume.
Hold Button + or Button – to continuously increase or reduce volume.
Switching the earphone/built-in speaker output
To unplug the earphone to change the sound output from earphone jack to built-in speaker.
Power reset
If there is shutdown to the player in the process of operation, you can turn off and restart the
player by pressing RESET button.
Connecting the computer and data file transmission
Start the computer and then connect the unit with the USB port of the computer using the
connection line. In this way you can perform USB power supply or USB data transmission. This
unit and the computer can be connected using the USB interface, and can be used as a moving
disk. All you do is put your favorite music in the player without the procedures of any third party
4