Extron Electronics RAC 104 User Manual
Page 15
RAC 104 • Installation and Operation
2-3
Tabletop use
Four self-adhesive rubber feet are included with the RAC 104.
For tabletop use, attach one foot at each corner of the bottom
side of the unit and place the unit in the desired location.
Rack mounting
For optional rack mounting, do not install the rubber feet.
Mount the RAC 104 on an RSF 123 VersaTools
™
19" 1U rack shelf
(Extron part #60-190-20) or a RSU 129 universal 1U rack shelf
(Extron part #60-190-01). On the Universal rack shelf, the unit
mounts in one of four locations to the rear of the rack or in one
of four locations to the front of the rack.
1
.
Remove rubber feet if they were previously installed on
the bottom of the RAC 104.
2
.
Mount the unit on the rack shelf, using two 4-40 x 3/16"
screws in opposite (diagonal) corners to secure the unit to
the shelf.
3.
Install blank panel(s) or other unit(s) on the rack shelf.
4.
Attach the rack shelf to the rack using the supplied bolts.
(2) 4-40 x 3/16" Screws
Use 2 mounting holes on
opposite corners.
1U Rack Shelf
1/4 Rack Width False Front
Face Plate
VO
LU
ME
&
TO
NE
C
ON
TR
OL
LE
R
1
2
3
4
Bas
s
Tre
ble
Vol.
AD
JU
ST
ME
NT
S
AU
DIO
C
ON
TR
OL
S
A
B
VO
LU
ME
&
TO
NE
C
ON
TR
OL
LE
R
1
2
3
4
Bas
s
Tre
ble
Vol.
AD
JU
ST
ME
NT
S
AU
DIO
C
ON
TR
OL
S
A
B
VO
LU
ME
&
TO
NE
C
ON
TR
OL
LE
R
1
2
3
4
Bas
s
Tre
ble
Vol.
AD
JU
ST
ME
NT
S
AU
DIO
C
ON
TR
OL
S
A
B
Mounting the RAC 104 on a VersaTools rack shelf
Only products in the VersaTools line can be mounted on
a VersaTools shelf. Most 1U rack-mountable Extron
products can be mounted on the standard shelf.