Extron Electronics RAC 104 - Manual (Page 34)

Remote Control, cont’d
RAC 104 • Remote Control 3-10
Windows ® -Based Program Control
The Windows-based Extron Audio Products Control Program is
compatible with Windows 2000 and Windows XP and provides
remote control of the volume, gain, and tone adjustment, and
other RAC 104 features.
Updates to this program can be downloaded from the Extron
Web site (http://www.extron.com).
Installing the software
The program is contained on the Extron Software Products
CD-ROM. To install the software:
1 . Insert the CD-ROM into the drive. The installation
program should start automatically. If it does not self-
start, run Launch.exe from the CD.
2 . The Extron software CD window appears.
Using the software
To run the software:
1 . Double click the Audio Products Control Program icon in
the Extron Electronics program group.
2 . Click the comm port that is connected to the unit’s remote
connector.
3 . Click OK. The Audio Products Control Program main
window displays the current volume, tone, and gain/
attenuation settings for each channel and allows the user
to adjust them. The window also contains channel tie,
channel mute, front panel lock out (executive modes), and
preset controls.
Windows-based control program main window