EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge User Manual
Page 10
Version 1.02
16
2.4.7 Upgrade the Firmware
Setup your TFTP Server
The Trivial File Transfer Protocol (TFTP) Server allows you to transfer files
across a network. You can download the firmware files for Wireless client
bridge upgrades.
After the TFTP Server is installed, make sure you have the proper TFTP
Server IP address, the proper Wireless client bridge firmware files, and the
TFTP Server is operational.
Update the Firmware using the TFTP method
Step 1 Enter the Utility > Software Upgrade page as shown in the figure
below, and can use TFTP to upgrade Wireless client bridge. Here,
user must specify the TFTP server IP and select which file you
want to upgrade it (Program image, Web image), then click OK
button to start the TFTP upgrade process.
Step 2 If the upgrade process is success, the Wireless client bridge will
apply the new settings and start rebooting right away.
Hint: You must set up a TFTP Server and this server must contain the
latest new image files.
Version 1.02
17
Upgrade the Firmware using RS-232 console
Please refer to
Provision 2.4.3
that introduces how to use RS-232 console
port.
Identify the IP Address assigned to the unit.
Step 1 If the connection is normal, when the Wireless client bridge is
powered up, the “Current Network Status” will be displayed as