EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge - Manual (Page 24)

Version 1.02 44
6.2 Software Specifications
Protocol TCP/IP
DHCP Client
802.1d Transparent Bridging
Security 64-/128-bit WEP encryption
MAC address based access control
Management Web-based Manager
Console (RS-232) configuration
SNMP v1
SNMP MIB-II
Private MIB
Firmware upgrade TFTP (Trivial FTP)
Xmodem, 1K Xmodem
Zmodem
Version 1.02 45
Chapter 7. Default Settings
7.1 General Configuration
7.1.1 System
Parameter Description Default Value
Host Name Host name for the RB ISP
IP Use MAC Addr.
You can choice IP produced
method .
Disable
Bridge IP Address 192.168.2.1
Bridge Subnet Mask
For Wireless Client Bridge with
Operation Mode
255.255.255.0
Default Gateway IP
Address
IP address of the gateway for
default route when TCP/IP
filtering
192.168.2.254
7.1.2 SNMP
7.1.2.1 Table of SNMP Community Pool
Parameter Description Default Value
Index 1 Enable
Index 2 Enable
Index 3 Disable
Index 4 Disable
Index 5
Validity
Enable or disable the function
of the corresponding community
index
Disable
Index 1 Read
Index 2 Write
Index 3 ---
Index 4 ---
Index 5
Access
Right
Select the access right
(Deny/Read/Write/Create) for
SNMP Manager
---
Index 1 public
Index 2 private
Index 3 ---
Index 4 ---
Index 5
Community
Specify the type of community
(public or private) for SNMP
Manager
---