EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge - Manual (Page 20)

Version 1.02 36
4.4.2 Administration
Step 1 Click Utility, Administration. The following figure shows the
Utility – Administration page.
9 Supervisor Account. Change the supervisor’s user name
& password in the Supervisor Account field, and Click
FINISH to take effect on the previous configuration
changes.
9 Apply the New Settings. Click Utility, Administration,
select the Save then Restart to apply the new
configuration settings.
Step 2 Click FINISH to take effect on the previous configuration changes.
Hint: It takes about 10 seconds, to complete the restart process.
Version 1.02 37
Chapter 5. Monitor Information
User can find the system running status and other information on this
window. Click the Running Status link on the left window, use can choose
which function that he wants to monitor.
„
General System Information
The following information can be found in this block.
9 Product Model
9 Host Name
9 Software Version
9 Build (Built by)
9 Boot Code Version
9 Web
Version
9 System Uptime
„
General System Status
The following information can be found in this block.
9 Operation Mode
9 Bridge IP Address
9 Bridge
Subnet
9 Wireless SSID
„
Services Information
This block shows whether the following services are enabled or disabled.
9 NAPT
9 SNMP
9 MAC
Filter
9 WEP encryption.