Emotiva DMC-1 - Manual (Page 22)

Page 22 Page 23
them off. Some have to be removed with a twisting action. Be gentle or you may damage the jacks
of your DMC-1, or other components.
• Many audiophile signal cables are intended to be hooked up in one direction. If this is the case the
cables will be marked with arrows the direction of signal flow.
• It is usual for the right channel RCA patch cord plugs to be red and the left channel connections
to be white, grey, or black (depending on the cable brand). RCA connectors that are gold will be
designated with a colored band to designate the channel.
• If the amplifier to which you will connect the DMC-1 features balanced XLR inputs, use the DMC-
1’s XLR balanced outputs instead of RCA type patch cords. Balanced signal transmission between
audio components provides superior rejection of hum and noise, especially if long cables are
required.