Emotiva DMC-1 - Manual (Page 55)

Page 54 Page 55
SETTINGS Menus
MAIN ZONE Menu
Power Up Source
This sets the input source which the EMO button will then always
select whenever the DMC-1 is turned on.
Power Up Volume Mode
This lets you choose the volume level the DMC-1 reaches when
it is turned on. You can select from a PRESET level, set below
(the power-up volume), or it can play at the LAST level it was
playing before it was turned off. The DMC-1 will always
turn on at the level set here, but it can be adjusted to any
level afterwards.
Power Up Volume
This allows you to set the PRESET volume level mentioned
above. You might want to set it to a low level to avoid
any surprises upon turn-on, especially if other users like
loud music.
Max Volume
The volume can be set to not exceed a certain level
chosen by you. This is useful if you have sensitive
speakers, sensitive neighbors, or you would rather not
have others play your system too loud. Finally, a smart
preamplifier where YOU can police the volume without
even being there!
ZONE 2 Menu
These settings are like those described for the Main Zone. In addition,
the entire Zone 2 can be enabled or disabled, and the stereo balance
adjusted with this menu.
The Power Up Volume has three options: PRESET, LAST and
FIXED. The FIXED option allows you to set the Zone 2 to a fixed
volume, not adjustable with the remote. PRESET and LAST are
as described for the Main Zone.