Emulex DCP_link - Manual (Page 106)

X.25 Configuration 7-13
10) Press <Enter> to select an Interface Group. Select a group from the list or
press <Ins> to create a new Interface group.
Modifying/Creating a Profile
1) Press <Enter> and select the standard profile for you X.25 service
provider.
All X.25 installations must have detailed port profiles defined. Press
<Enter> to display the available list of standard profiles for various X.25
service providers. Check with service provider for the profile name.
2) To modify or view existing parameters, press <F3> to display the X.25
Profile Configuration menu.
Figure 8-4 X.25 Profile Configuration
Frame Level Parameters:
DTE/DCE Frame Node Type Frame Window Size (k)
Retry Count (N2) Retry Time-out(T1)
Packet Level Parameters:
X.25 Version Support Packet Sequencing Modulo
DTE/DCE Packet Layer Type Default Window Size
Default Packet Size
Virtual Circuit Setup Parameters: