Emulex DCP_link - Manual (Page 69)

Software Installation 4-9
6) Select Driver Options from the Installation Options menu, select
Configure the Network Drivers and press <Enter>.
7) Using arrow keys, highlight Deselect a Selected Driver and press
<Enter>.
8) Use the arrow keys to select the EMXMLID driver and press <Enter> or
<Delete> to remove it.
9) Return to the Installation Options menu and select Product Options .
10) From the Other Installation Actions menu, select
View/Configure/Remove Installed Products.
11) Using the arrow keys, highlight the Emulex product and press the
<Delete> key to remove the product from the installation database.
12) Exit the Install utility.
13) Remove the following directories and all associated files:
> sys:system\Emulex\system
> sys:system\Emulex
14) Remove all associated files in:
> sys:system\emx*.*
also remove the following files:
> sys:system\x.25_cca.nlm
sys:system\fr_cca.nlm
sys:system\subagent.nlm
15) Bring down and exit the server.
What’s Next?
After installing the DCP_link software, refer to Chapter 5 for:
† Software Configuration