Uninstall procedures, Uninstall using netware version 3.12, 1) at the console server prompt, type – Emulex DCP_link User Manual
Page 66: 3) press <esc> to return to previous menu, Uninstall procedures -6, Uninstall using netware version 3.12 -6
4-6 Chapter 4
9) Highlight EMULEX WAN for NetWare and press <Enter> to access
the Internetworking Configuration menu.
10) You are now ready to configure the Emulex DCP_link adapter and create
specific WAN links. Please turn to Chapter 5, Software Configuration
to continue.
Uninstall Procedures
If it becomes necessary to unload Emulex software from your server/router,
such as during an upgrade to a newer release, perform the following steps
according to the Novell NetWare version you are running (version 3.12 vs.
4.1).
Uninstall Using NetWare Version 3.12
1) At the console server prompt, type:
>
LOAD INETCFG <Enter>.
The Internetworking Configuration menu will be displayed:
2) Select
Network Interfaces.
Using the <Del> key, deconfigure all
interfaces associated with the Emulex adapter.
Figure 4-8. The Internetworking Configuration Menu
3) Press <Esc> to return to previous menu.
4) Select
Boards
and remove all Emulex WAN configurations by
highlighting all references to the EMXMLID driver and pressing the
<Delete> key.