Instructions for safe operation – Silvercrest SKG 1700 A2 User Manual

Page 48

Advertising
background image

46 GB

Instructions for safe operation

• This device can be used by children from the age of 8 and peo-

ple with restricted physical, sensory or intellectual abilities or
people without adequate experience and/or understanding, if
they are supervised or instructed on how to use this device safely
and if they are aware of the resulting risks.

• Children must not play with the device.
• Cleaning and user maintenance must not be performed by unsu-

pervised children unless they are older than 8 years and super-
vised.

• Children under the age of 8 must be kept away from the device

and the power cable.

• This device is not intended to be operated using an external timer

clock or a separate remote control system.

• If the power cable of this device should become damaged, it

must be replaced by the manufacturer, the manufacturer's custom-
er service department or a similarly qualified specialist, in order
to avoid any hazards.

• Charcoal and similar fuels must not be used in this device.
• The heating spirals must not be wiped with a damp cloth.

DANGER for children

• Packing materials are not children's

toys. Children should not be allowed to
play with the plastic bags: There is a
risk of suffocation.

• Please ensure that children are not able

to pull the device down from the work
surface with the power cable.

• Keep the device out of the reach of chil-

dren.

DANGER! Risk of electric
shock due to moisture

• The device, the power cable and the

mains plug must not be immersed in wa-
ter or any other liquids.

• Protect the device from moisture, water

drops and water spray.

• If liquid gets into the device, remove the

mains plug immediately. Have the device
checked before reusing.

• Never touch the device with wet hands.
• If the device falls into water, disconnect

the mains plug immediately. Only then
is it safe to retrieve the device.

DANGER! Risk of electric
shock

• Only plug the mains plug into the wall

socket after the device has been com-
pletely assembled.

• Only connect the mains plug to a prop-

erly installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must continue to be eas-

__RP100156_B5.book Seite 46 Dienstag, 10. Juni 2014 4:43 16

Advertising