Cleaning, 4 switching off – Silvercrest SKG 1700 A2 User Manual

Page 52

Advertising
background image

50 GB

Barbecue (Figure B)

The open position of the grill plates is suita-
ble ...

… for slow grilling of comparatively

thick food,

… for preparing food with different tem-

perature settings simultaneously, and

… for preparing comparatively large

quantities of food.

1. Preheat the grill plates13.
2. Fold out the base3.
3. Open the lid4 upwards, lift it up, and

open it further until it is horizontal.

4. Place the other grease drip tray16 un-

der the oil/fat runoff14 of the grill
plate13 in the lid.

5. Place the food to be grilled on both grill

plates13.

Grill oven (Figure C)

The oven function is particularly suitable for
the gratinating of food.

1. Preheat the grill plates13.
2. Open the lid4 of the contact grill up-

wards. Be careful not to raise the lid
any further after it is vertical.

3. Place the food to be grilled on the lower

grill plate.

4. Lift the lid4 up and pull it forwards and

down, until it is parallel to the lower grill
plate13.

6.4 Switching off

1. Set both thermostat controls9 +15 to

the setting "•".

2. Pull out the mains plug6.
3. Lift the grilled food off the grill plate13

using a suitable kitchen utensil. Use e.g.
a spatula made from wood or heat-re-
sistant plastic, but never from metal.

7. Cleaning

Clean the device prior to its first use!

DANGER! Risk of electric
shock!

• Pull the mains plug6 out of the wall

socket before you clean the contact grill.

• The device, the power cable

and the mains

plug6 must not be immersed in water or
any other liquids.

DANGER! Risk of injury
through burning!
Allow all the parts to cool down be-
fore cleaning.

WARNING! Risk of material damage!
Do not use any astringent or abrasive clean-
ing agents.

Clean the device after each use and remove
all food residues.

Outer surfaces

• Clean the outer surfaces using a soft,

damp cloth with a mild soap solution.

Grill plates

For purposes of cleaning, remove the grill
plates13 from the device after it has cooled
down.

1. Press the grip clamps5 to the side and

remove the grill plates13 from their
brackets.

2. Clean the grill plates13 using mild de-

tergent and dry them.

3. Place the grill plates into the device and

press them against the grip clamps5
until the grill plates click into position.

NOTE: burnt-on food or fat residue is often
easier to remove if you leave a damp wash-
cloth on the baked-on residue overnight to
soften it.

__RP100156_B5.book Seite 50 Dienstag, 10. Juni 2014 4:43 16

Advertising