Silvercrest Z30412-DK - Manual (Page 176)

178 GB/MT
You can reactivate the LC display 1 by
pressing the FUNCTION 2 , SET 3 or
SELECT 6 button.
Note: Take the batteries out of the ener-
gy cost meter if you are going to remove
it from the mains outlet socket for more
than 12 hours. By doing this you will
prolong the life of the batteries.
Note: You can reach the desired values
quicker if you press and hold down the
SELECT
6 button. This quicker method
can also be used for making the
following settings.
 Programming the
date / time
Note: The time format can be switched
between 12- and 24-hour formats and
back again in every operating mode in
66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 178 25.05.11 12:21