Silvercrest Z30412-DK - Manual (Page 197)

199 GB/MT
by a bar to the next higher kWh value.
The following table shows the
bar value increments used by
the device:
1 bar = 1 kWh
(6 bars = 6 kWh)
(factory default
setting)
1 bar = 2 kWh (6 bars = 12 kWh)
1 bar = 5 kWh (6 bars = 30 kWh)
1 bar = 10 kWh (6 bars = 60 kWh)
1 bar = 15 kWh (6 bars = 90 kWh)
 Changing the batteries
Note: All the stored values are erased
automatically as soon as you remove the
batteries from the device.
Note: To do this you will require a
crosshead screwdriver.
66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 199 25.05.11 12:21