Before using for the first time, 7 for the safety of your child, 8 material damage – Silvercrest SCM 1500 A1 User Manual

Page 8

Advertising
background image

6

on the mains cable and injure
themselves.

4.7 For the safety of your child

Warning! Children are often
unaware of danger and are injured
as a result. Please note therefore:

• Only allow children to use this appliance

under the supervision of an adult.

• Ensure the appliance is always kept out

of the reach of children.

• Ensure that children cannot pull the

appliance down onto themselves with
the cable.

• Ensure that the packing foil does not

become a deadly trap for a child.
Packing foils are not toys.

4.8 Material damage

Caution! To avoid material damage,
please observe the following conditions.
• The appliance must not be placed on

hot stoves, put in a hot oven or set up in
the vicinity of gas heaters and on-
demand water heaters, as this could
cause damage.

• Only use implements made from wood

or heat-resistant plastic. Metal
implements may damage the coated
surfaces.

• Surface cleaners (furniture and work

surfaces) may contain ingredients that
could attack and soften the rubber feet.
In this case, place the appliance on a
non-flammable surface.

• Do not place any items on the

appliance.

• If the appliance is connected to the

mains it may be damaged by lightning
during thunderstorms.

5. Before using for the first time

During manufacture, many parts are given a
thin film of oil to protect them. Before using
the appliance for the first time, run it without
crêpes to allow any residues to evaporate.
Note: When heating up for the first few
time a slight smell may be produced. Make
sure the room is adequately ventilated.
1. Take the appliance out of the pack-

aging.

2. Check that the appliance shows no signs

of damage.

3. Clean the appliance before using it for

the first time. Observe the information in
the section entitled “7. Cleaning and
storage” on page 8.

4. Select a location that is firm, level and

not flammable. Maintain a distance of
approx. 50 cm from other objects.

5. Unwind the mains cable completely.
6. Place the baking plate 1 on the bottom

section 2.

7. Insert the power supply plug into a suita-

ble mains socket.
The red indicator 3 comes on to show
that the appliance is connected to the
power supply.

8. Turn the temperature control to "MAX".

As soon as operating temperature has
been reached, the green indicator 5
comes on.

RP90844 Crepes-Maker LB4 Seite 6 Montag, 5. August 2013 10:52 10

Advertising