Edirol UM-1EX - Manual (Page 18)

18
The following describes the settings needed to use the UM-1EX with Media Player or other
sequencer software using Windows standard device settings.
If you are using sequencer software that does not utilize Windows standard device settings, make
the device settings within the sequencer software.
1. Open the Sounds and Audio Devices Properties dialog box.
1. From the Windows start menu, choose Control Panel .
2. In “Pick a category,” click Sound, Speech, and Audio Devices.
3. In “or Pick a Control Panel icon,” click the Sounds and Audio Devices icon.
Depending on your setup, the Sounds and Audio Devices icon may appear directly in the
Control Panel (Classic view). If so, double-click the Sounds and Audio Devices icon.
2. Click the Audio tab.
fig.XP-E
3. For MIDI music playback , click the ▼ located at the right
of [Default device] , and select the MIDI device from the
list that appears.
Selecting
“EDIROL UM-1 MIDI” enables sounds to be
played from the sound module connected to the UM-
1EX’s MIDI OUT cable with Media Player or other
sequencer software utilizing Windows standard device
settings.
4. Close the Sounds and Audio Devices Properties dialog
box.
Click
[OK] to complete the settings.
Setting the Driver
Windows XP users
UM-1EX_multi1.book 18 ページ ２００５年１１月１日 火曜日 午後３時１９分