Oms settings – Edirol UM-1EX User Manual
Page 28
28
■
OMS settings
If you are using FreeMIDI, proceed to
1.
to the
ON
position.
2.
Connect the UM-1EX to your Macintosh.
* Connect the cable to the USB connector of the Macintosh itself, not to the USB connector of the keyboard.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the UM-
1EX is required before the unit will operate normally.
fig.3-3
3.
From the CD-ROM, drag the
Driver E (Mac OS 9)
-
OMS Setting
folder into the
Opcode
-
OMS Applications
folder on the hard disk of your Macintosh to copy it
there.
fig.3-4
4.
In the
Opcode
-
OMS Applications
folder where you installed OMS, double-click
OMS Setup
to start it up.
fig.3-5_35
5.
If a dialog box like the one shown here appears,
click
[Turn It Off]
. A
confirmation
dialog box
will then appear, so click
[OK]
.
* We recommend that you turn off
AppleTalk
, by
selecting Chooser from the Apple menu.
Operation of the UM-1EX
Operation of the UM-1EX
UM-1EX_multi1.book 28 ページ ２００５年１１月１日 火曜日 午後３時１９分