If you are using freemidi, proceed to, Freemidi settings, P. 31) – Edirol UM-1EX User Manual
Page 31
31
■
FreeMIDI settings
1.
Set the UM-1EX’s
to the
ON
position.
2.
Connect the UM-1EX to your Macintosh.
* Connect the cable to the USB connector of the Macintosh itself, not to the USB connector of the keyboard.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the UM-
1EX is required before the unit will operate normally.
3.
From the CD-ROM, drag the
Driver E (Mac OS 9)
-
FreeMIDI Setting
folder into the
FreeMIDI
Applications
folder on the hard disk of your Macintosh to copy it there.
4.
Open the
FreeMIDI Applications
folder from the location into which you installed
FreeMIDI
, and
double-click the
FreeMIDI Setup
icon to start it up.
When
“OMS is installed on this computer...”
appears, click
[FreeMIDI]
.
5.
The first time you start up, use the following procedure.
1.
A dialog box saying
“Welcome to FreeMIDI!”
will appear.
Click
[Continue]
.
2.
The
FreeMIDI Preferences
dialog box will appear.
Click
[Cancel]
.
3.
The
About Quick Setup
dialog box will appear.
Click
[Cancel]
.
6.
From the
File
menu, choose Open.
If you are unable to select Open, return to step 4 and continue the procedure.
1.
From the File menu, choose FreeMIDI Preference.
2.
Uncheck “Use OMS when available.”
3.
Close FreeMIDI.
7. Select UM-1 from the FreeMIDI Setting folder you copied in step 3, and click [Open].
8. Verify that MIDI transmission and reception occur correctly.
From the MIDI menu, choose Check Connections.
Operation of the UM-1EX
Operation of the UM-1EX
UM-1EX_multi1.book 31 ページ ２００５年１１月１日 火曜日 午後３時１９分