Edirol UM-1EX - Manual (Page 40)

40
Did you make “Driver Signing Options”?
In order to install/re-install the driver, you must make the settings described in “Driver Signing
Options” (p. 12).
Did you connect the UM-1EX to a different USB connector than the one you used when
installing the driver?
If your computer or USB hub has two or more USB connectors, and you connect the UA-1EX to a
different USB connector, you may be asked for the driver file even though the driver has already
been installed in your computer. (Such a response does not indicate a malfunction.)
Proceed as follows to install the driver.
1. Connect the UM-1EX to the computer.
Windows XP:
1.
The Found New Hardware Wizard dialog box will appear.
If the message “Connect to Windows Update to search for software?” appears, choose “No”
and then click [Next] .
2. Choose “Search for the best driver in these locations” and click [Next] .
If a dialog box with an “!” or “x” symbol will appear, click [Continue Anyway] to proceed with
the installation. If you are unable to continue, click [OK] and repeat the driver installation.
( ➔ “Installing the Driver” (p. 12))
Windows 2000:
If a dialog box indicating “Digital Signature Not Found” will appear, click [Yes] to proceed
with the installation. If you are unable to continue, click [OK] and repeat the driver installation.
( ➔
“Installing the Driver” (p. 12))
2. The Completing the Found New Hardware Wizard dialog box will appear.
Click [Finish] .
3. If the Change System Settings dialog box appears, click [Yes]. Windows will restart
automatically.
If you are unable to complete driver installation using the above method, repeat the driver
installation. (
➔“Installing the Driver” (p. 12))
Windows XP/2000 displays a “Hardware Installation” or “Digital
Signature Not Found” dialog box
You are asked to install the driver file even though you installed the driver
(Windows)
UM-1EX_multi1.book 40 ページ ２００５年１１月１日 火曜日 午後３時１９分