Silvercrest SAB 160 A1 - Manual (Page 33)

31
Handling and operation
SAB 160 A1
GB
Caller lists
Press the ♦ PHONE button on the device. CALL LIST appears in the display
Press the ♦ PHONE button again. IN CALL appears in the display.
Turn the multi controller to select between the following displays: ♦
IN CALL – : Shows the last 20 incoming calls.
OUT CALL – : Shows the last 20 outgoing calls.
Press the ♦ PHONE button again. READING appears in the display and
subsequently shows the last incoming (IN CALL) and/or dialled (OUT CALL)
call number.
Turn the multi controller to show the last 20 received and/or dialled call ♦
numbers one after the other.
Press the ♦ button to dial the selected call number.
Press the ♦ button to end redialling and exit the caller list.
Telephone book function
You can transfer up to 20 contacts (Telephone book entries) from the connected
mobile phone to the device and thus dial and call the contact from the device.
NOTICE
Details for the transference of the contact via Bluetooth can be obtained ►
from the operating instructions of your mobile phone.
Each transfered contact is fi led in the memory slot ► PB01. The contacts that
have already been transfered are automatically fi led one memory slot
further (PB02, etc).
Press the ♦ PHONE button on the device. CALL LIST appears in the display
Turn the multi controller to select the display ♦ PH BOOK.
Press the ♦ PHONE button again. READING appears in the display.
Subsequently PB01 appears and the name and call number of the fi rst
memory slot is shown.
Turn the muti controller to select additional telephone book entries. ♦
Press the ♦ button to dial the selected call number.
Press the ♦ button to end the call and exit the directory function.