Silvercrest SAB 160 A1 - Manual (Page 8)

6
Introduction
SAB 160 A1
GB
Package contents and transport inspection
WARNING
Risk of suff ocation!
Packaging material should not be used as a play thing. ►
There is a risk of suff ocation!
The device is delivered with the following components as standard:
Car radio (incl. face plate) ▯
Installation bracket (Attached) ▯
Bezel frame (Attached) ▯
Fixture plate (incl. securing material) ▯
Keys for installation frame (2x) ▯
Case for face plate ▯
Microphone unit with adhesive strip ▯
Adapter cable for ISO-Block A ▯
Operating instructions ▯
NOTICE
Check the contents to make sure everything is there and for visible damage. ►
If the contents are not complete or are damaged due to defective packaging ►
or through transportation contact the service hotline (see warranty card).
Disposal of the packaging
The packaging protects the device from transport damage. The packaging materials
are selected from the point of view of their environmental friendliness and disposal
technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste. Dispose of packaging material that is no longer
needed according to the regionally established regulations.
NOTICE
If possible preserve the device's original packaging during the warranty ►
period so that in the case of a warranty claim you can package the device
properly for return.