Silvercrest SRW 250 A2 - Manual (Page 18)

SRW 250 A2 Alarm Clock Radio
16 - English
Tuning to a Station
 Power the device on by pressing the ON/OFF-FM/AUX button [2].
 The current frequency is shown briefly on the display [10]. As soon as
the current time is shown, you can press the – [7] or + [8] buttons to
adjust the volume.
 Press the ON/OFF-FM/AUX button [2] briefly. As soon as the current
frequency is shown, you can press the – [7] or + [8] buttons to set the
desired frequency manually.
 To search for a station automatically, press and hold the – [7] or +
[8] button. The currently-tuned frequency is indicated in MHz. Any
frequencies with 0.05 MHz are shown by means of the 0.05 LED
[19]. If required, move the wire antenna into a different position or
move the device to improve reception.
 You can save a station by pressing and holding the PRESET button [6]
for approx. 1-2 seconds.
 “P” flashes on the display [10], followed by a number between 01
and 20.
 Press – [7] or + [8] to select the station preset you want.
 Press the PRESET button [6] again to save the current station to the
selected preset.
Automatic Station Search
If you do not want to set the stations manually, you can have the device
search for them automatically. Proceed as follows: