Silvercrest SRW 250 A2 - Manual (Page 22)

SRW 250 A2 Alarm Clock Radio
20 - English
Switching the alarm off
When the alarm starts, you can disable it as follows.
 Press the ON/OFF-FM/AUX button [2] to stop the alarm. The alarm is
switched off until the next day.
 or
 Press the SNOOZE/LIGHT button [9] to delay the alarm for approx.
6 minutes. After this period, the alarm starts again.
While SNOOZE is enabled, the corresponding alarm
LED [20, 21, 22 or 23] will flash.
SLEEP Timer
The sleep timer powers the device off automatically after a set time.
 While the device is powered on, press the NAP/SLEEP button [4]. The
number “60” appears on the display [10] to indicate that the device
will power off automatically after 60 minutes.
 Press the NAP/SLEEP button [4] multiple times to decrease the
countdown time shown. Each press of the button reduces the power-
off time by 10 minutes.
 If “OFF” is shown on the display [10], the sleep timer is disabled and
the device will stay on. You can press the NAP/SLEEP button [4]
again to select the power-off delay from the beginning.