MCZ Forma Wood 75 Dx - mod.2012 - Manual (Page 24)

22
6-INSTALLATION AND ASSEMBLY
CHOICE OF OPERATING MODE
IMPORTANT!
Before installation one must decide which system to use.
The FORMA has the possibility to distribute hot air according to the NATURAL CONVECTION (COMFORT AIR VN) method or FORCED
CONVECTION (COMFORT AIR VF) method via a forced ventilation kit.
Natural convection (COMFORT AIR VN)
In the case of natural ventilation, air enters naturally in the lower part of the closed fireplace.
Forced convection (COMFORT AIR VF)
If one uses this system, purchase the Comfort Basic Air Kit or the Comfort Air Slim optional kit and follow what is specified in the
instructions contained in each kit.
COUNTERWEIGHTS UNLOCKING
The closed fireplace is supplied with the sliding counterweights locked to prevent dangerous knocks that could damage the sliding parts,
door and ceramic glass during transportation and positioning.
To unlock the counterweights and therefore the door, remove the screws as shown in figure 1 from both sides of the closed fireplace in
correspondence of the stickers with arrows placed on both sides.
Remove the counterweights fixing screws only after having positioned the closed fireplace and to check that the
glass is intact.
DO NOT HANDLE NOR MOVE THE CLOSED FIREPLACE WITHOUT THE COUNTERWEIGHTS FIXING SCREWS.
Damage caused by failure to comply with this rule is under the responsibility of the customer or whoever represents
him.
FIGURE 1 - COUNTERWEIGHTS BLOCKING SCREW