Warnings and warranty conditions – MCZ Forma Wood 75 Dx - mod.2012 User Manual

Page 4

Advertising
background image

2

1-WARNINGS AND WARRANTY CONDITIONS

SAFETY PRECAUTIONS

Installation, electrical connection, function test and maintenance must only be carried out by authorised and

qualified personnel.

Install the product in accordance with all local and national legislation and regulations in force in the region or state.
• Only use the fuel recommended by the manufacturer. The product must not be used as an incinerator.

• It is strictly forbidden to use alcohol, petrol, liquid fuel for lanterns, diesel, bio-ethanol, fluids for lighting charcoal or similar liquids to

light/rekindle the flame in these devices. Keep these flammable liquids well away from the appliance when in use.

• Do not insert fuel other than wood in the combustion chamber.
• The instructions provided in this manual must always be complied with to ensure the product and any electronic appliances

connected to it are used correctly and accidents are prevented.

• The user, or whoever is operating the product, must read and fully understand the contents of this installation guide before

performing any operation. Errors or incorrect settings can cause hazardous conditions and/or poor operation.

• Do not climb on or lean on the product.
• Do not put linen on the product to dry. Any drying racks or similar objects must be kept at a safe distance from the product. Fire

hazard.

•  All liability for improper use of the product is entirely borne by the user and relieves the Manufacturer from any civil and criminal liability.
• Any type of tampering or unauthorised replacement with non-original spare parts could be hazardous for the operator’s safety and

relieves the company from any civil and criminal liability.

• Many of the surfaces of the product get very hot (door, handle, glass, smoke extraction pipes, etc.). Avoid coming into contact

with these parts, without adequate protective clothing or suitable implements, such as gloves with thermal

protection or “cold handle” operating systems.

It is forbidden to operate the product with the door open or the glass broken.
• The product must be powered by an electrical system that is equipped with an effective earthing system.
• Do not wash the product with water.
• Do not stand for a long time in front of the product in operation. Do not overheat the room you are in and where the product is

installed. This could cause injuries and health problems.

• Install the product in a location that does not present a fire hazard and is equipped with power and air supplies and smoke extractors.

• Do not use water to put the fire out.
• In the event the chimney catches fire never open the fuel loading door. Then contact the competent authorities.
• The product and the cladding must be stored in a dry place and must not be exposed to weathering.
• It is recommended not to remove the feet that support the product in order to guarantee adequate insulation, especially if the

flooring is made of flammable materials.

• Special maintenance must only be performed by authorised and qualified personnel.
• Assess the static conditions of the surface on which the weight of the product will rest and provide suitable insulation if it is made of

flammable material (e.g. wood, fitted carpet or plastic).

Advertising