MCZ Stripe Overnight - Manual (Page 20)

A B
18
4-INSTALLATION AND ASSEMBLY
The product must always remain in a vertical position and handled solely with a forklift. Pay particular attention to the door and its glass,
protecting them from mechanical knocks that would compromise their integrity.
In any case, the product must always be handled with care. If possible, unpack the product near the place of installation.
The packaging materials are neither toxic nor harmful, and therefore no particular disposal measures are required. The end user is
responsible for product storage, disposal or possible recycling in compliance with the relative applicable laws.
ASSEMBLING AND ADJUSTING THE FEET
The product requires the support feet to be assembled, whose function is to adjust the product level for it to be aligned and stable on the
ground. The feet are screwed to the base of the structure and they can be applied as shown in the figure and adjusted with a screwdriver
by acting on the head of the feet.
For an effective closing function of the doors, adjust the feet for there to be a difference of 2 mm between the front and rear of the base
(see figure).
ASSEMBLING THE STORAGE PANELS
The storage parts can now be assembled.
The storage consists of:
STORAGE A B C D E F
NO. OF ITEMS 4 4 1 1 2 1
A = B+2 MM