MCZ Stripe Overnight - Manual (Page 3)

1
INTRODUCTION
Dear Customer,
thank you for having chosen a product from our Wood-burning range.
Products manufactured with OYSTER technology, do not consume the oxygen inside the room when installed correctly, thanks to a perfectly
sealed structure, but draw all the air from outside and can therefore be installed in any well-insulated home and in passive houses. This
technology eliminates all risks of smoke being released into the room and ventilation grilles are no longer required. Consequently, there
will be no more flows of cold air in the room, which make it less comfortable and compromise the overall efficiency of the system.
The sealed product can be installed in the case of forced ventilation or in a room in which there may be a negative pressure compared to
outside.
To allow for optimal product operation and for you to enjoy the warmth and sense of wellbeing that the fire can convey in
your home, we advise you to read this manual carefully before starting up the product for the first time.
REVISIONS TO THE PUBLICATION
The content of this manual is strictly technical and property of MCZ Group Spa.
No part of this manual can be translated into another language and/or altered and/or reproduced, even partially, in another form, by
mechanical or electronic means, photocopied, recorded or similar, without prior written approval from MCZ Group Spa.
The company reserves the right to make changes to the product at any time without prior notice. The proprietary company reserves its
rights according to the law.
CARE OF THE MANUAL AND HOW TO CONSULT IT
• Take care of this manual and keep it in an easily accessible place.
• Should the manual be misplaced or ruined, request a copy from your retailer or directly from the authorised technical assistance
Department.
• “Bold text” requires particular attention.
• “Text in italics” is used to draw your attention to other paragraphs in this manual or any additional explanation.
• “Note” provides the reader with additional information.
SIMBOLOGIA PRESENTE SUL MANUALE
ATTENTION:
carefully read and understand the relative message because failure to comply with that which is written can
cause serious damage to the product and put the user’s safety at risk.
INFORMATION:
failure to comply with these provisions will compromise the use of the product.
OPERATING SEQUENCES:
sequence of buttons to be pressed to access the menus or make adjustments.
MANUAL:
carefully read this manual or the relative instructions.
Technical Dept. - All rights reserved - Reproduction is prohibited