Xerox Phaser 3330 - Manual (Page 27)

3
Installation and Setup
See also:
Installation Guide packaged with your printer.
System Administrator Guide at www.xerox.com/office/3330docs .
Installation and Setup Overview
Before printing, ensure that your computer and the printer are plugged in, turned on,
and connected. Configure the initial settings of the printer, then install the driver software
and utilities on your computer.
You can connect to your printer directly from your computer using USB, or connect to
a network using an Ethernet cable or wireless connection. Hardware and cabling
requirements vary for the different connection methods. Routers, network hubs, network
switches, modems, Ethernet cables, and USB cables are not included with your printer
and must be purchased separately. Xerox recommends an Ethernet connection because,
typically, it is faster than a USB connection, and it provides access to Xerox
® CentreWare ®
Internet Services.
Note
If the Software and Documentation disc is not available, you can download the latest
drivers from
www.xerox.com/office/3330drivers .
Related Topics:
Selecting a Location for the Printer
Selecting a Connection Method
Connecting the Printer to the Network
Configuring Network Settings
Installing the Software
3-1 Xerox ® Phaser ® 3330 Printer
User Guide