Xerox Phaser 3330 - Manual (Page 95)

Solutions Symptom
• Verify that the paper is the correct size, type, and weight
for the printer and that it is loaded properly. If not, change
the paper.
• Try a new ream of paper.
• Change the Paper Type settings in the print driver.
• In the Printing Preferences of the print driver, on the Pa-
per/Output tab, change the Paper Type setting.
The output print is wrinkled or
stained.
• Verify that envelopes are loaded properly in the bypass
tray.
• Follow the guidelines for printing on envelopes. For details,
refer to Guidelines for Printing Envelopes .
Envelopes are wrinkled or
creased when printed.
• Verify that the paper is loaded properly.
• Verify that the margins are set correctly in the application
you are using.
The top margin is incorrect.
1. Print a solid image over the entire surface of one sheet
of paper.
2. Load the printed sheet into the tray with the printed side
face down.
3. Print five blank pages to remove debris from the fuser
rollers.
The printed surface of the paper
is bumpy.
7-27 Xerox ® Phaser ® 3330 Printer
User Guide
Troubleshooting