Oki MC363dn User Manual
Page 133
Troubleshooting > 133
(d)
Lower the belt unit into place, with the drive gear towards the rear of the printer.
Locate the drive gear into the gear inside the printer by the rear right corner of
the unit, and lower the belt unit flat inside the printer.
(e)
Push the locking levers towards the rear of the machine. This will secure the belt
unit in place.
8.
Holding the image drum assembly by its handles, lower it into place in the machine,
locating the pegs at the sides into their slots in the sides of the printer cavity.
9.
Lower the output tray but do not press down to latch it closed yet. This will protect
the drum from excessive exposure to room lighting while you check the remaining
areas for jammed sheets.
10. Open the rear exit tray (h) and check for a sheet of paper in the rear path area (i).
>
Pull out any sheets found in this area.
h
i