RISCO Group SMPS 3A - Manual (Page 4)

4 SMPS - Installation Guide
Introduction
The Switching Mode Power Supply (SMPS) is a reliable, supervised power
supply expansion module, for use with RISCO’s ProSYS security systems.
It provides a total current capacity of up to 3A with extensive remote
diagnostics features that comply with EN50131requirements. It supports a
standby battery and is supervised for loss of Mains, Battery, failure of its
auxiliary output power and loss of its sounder device.
Up to 8 modules can be added to the system to ensure reliable operation of
the system with its multiple devices and accessories.
The SMPS includes two Utility Outputs, which may be separately
programmed by the ProSYS as regular utility outputs.
Main Features
Ê
3A switching mode power supply with self supervision
Ê
Advanced remote diagnostics – includes remote Upload/download or
keypad reading of voltage output and current under load
Ê
Automatic battery protection and remote voltage reading
Ê
Supports 1.7 Amp Siren, with remote reading of siren current
Ê
Includes two 3A utility output relays