Rose Electronics VISTA L-SERIES - Manual (Page 28)

22 Vista L-Series Installation and Operations Manual
Configure computer name
Each computer is initially assigned a computer name, “computer x”,
where “x” = 1-8. To change the computer name to one of your choosing,
use the up/down arrow keys to select (highlight) the computers name to
change. Once selected (highlighted), press enter to clear the present
name. Enter the new computer name (up to 16 valid ASCII characters)
and press <Enter>. The new name will be changed and saved immediately
in non-volatile memory.
Figure 11. OSD Computer name
The computer name is case sensitive. Use upper/lower case
letters as needed. (16 ASCII characters Maximum).
The “Reset to Initial Factory Settings” function will not change
the assigned computer names from their present values.
Change the computer names
Port Computer name
1 Computer 1
2 Computer 2
3 Computer 3
4 Computer 4
5 Computer 5
6 Computer 6
7 Computer 7
8 Computer 8
F1 for help