Rose Electronics VISTA L-SERIES - Manual (Page 35)

Vista L-Series Installation and Operations Manual 29
Configure miscellaneous
This menu allows you to change the maximum computer ports and scan
time.
Figure 16. OSD Configure miscellaneous
Maximum ports:
The “Maximum ports” configuration allows you to change the total number
of computer ports that are in use. If your using an 8-port switch and only
connecting 6 CPUs, changing the maximum ports from 8 to 6 will skip
computer ports 7 and 8 during the scan function. To change the
“Maximum Ports”, highlight the maximum ports and press <Enter> to clear
the field. Type in the new value (1-8) and press <Enter>.
Scan time:
This item sets the pause time during the scan function.
To change the “Scan time”, highlight the scan time and press <Enter> to
clear the field. Type in the new value (1-16 seconds) and press <Enter>.
Miscellaneous
Maximum ports 8
Scan time (seconds) 5
F1 for help