Rose Electronics CrystalView DVI Mini - Manual (Page 15)

CrystalView DVI Mini Installation and Operations Manual 11
Dual head (USB-HID model) Installation
Transmitter Installation
1. Connect the two supplied DVI-D male-to-male cables from the computer’s
DVI video out connectors to the two Transmitter’s DVI-D video in
connectors.
2. Connect the two supplied USB Type A to Type B cables from a USB port
on the computer to the two USB Type A connectors on the Transmitter.
3. Connect the supplied power adapter to the Transmitter.
(Do not apply power at this time)
Receiver Installation
4. Connect a DVI monitor, USB keyboard, and USB mouse to the
corresponding connectors on the Receiver unit.
5. Connect a second DVI monitor to the second DVI-D video out connector.
6. Connect the supplied power adapter to the Receiver. (Do not apply power
at this time)
Transmitter to Receiver Connection (See diagram below)
7. Connect up to 150 ft. (50 m) of CAT5e or better cable from the RJ45
connectors on the Transmitter to the RJ45 connectors on the Receiver.
NOTE: USB-HID models support a maximum of two USB-HID devices.
Figure 6. Dual head Installation (USB-HID)
CATx cabling is connected as
shown to the left. Up to 150 ft.
max.