Rose Electronics CrystalView DVI Mini - Manual (Page 16)

12 CrystalView DVI Mini Installation and Operations Manual
Single head (USB-2.0 model) Installation
Transmitter Installation
1. Connect the supplied DVI-D male-to-male cable from the computer’s DVI
video out connector to the Transmitter’s DVI-D video in connector.
2. Connect the supplied USB Type A to Type B cable from a USB port on the
computer to the USB Type A connector on the Transmitter.
3. Connect the supplied power adapter to the Transmitter. (Do not apply
power at this time)
Receiver Installation
4. Connect a DVI monitor, USB keyboard, and USB mouse to the
corresponding connectors on the Receiver unit.
5. Connect the USB 2.0 transparent devices to the USB ports
6. Connect the supplied power adapter to the Receiver.
Transmitter to Receiver Connection
7. Connect two CAT5e or better cable from the RJ45 connectors on the
Transmitter to the RJ45 connectors on the Receiver.
Figure 7. Single head Installation (USB-2.0)
CATx cabling is connected as
shown to the left. Up to 150 ft.
max.