Rose Electronics CrystalView DVI Quad - Manual (Page 29)

INDICATORS
25 CRYSTALVIEW DVI QUAD INSTALLATION AND OPERATIONS MANUAL
LED Indicators
DATA LINK
ERROR STATUS
Figure 5. Link Port LED Indicators
Data Error
(Left LED at CATx connectors)
•
Off - No errors, device ready
•
Blinking / On – Transmitter / Receiver communication not established
Link Status
(Right LED at CATx connectors)
•
Blinking – No CATx connection detected
•
On – Transmitter / Receiver communication established, device ready
DATA LINK
ERROR STATUS
Figure 6. Fiber Port LED Indicators
Data Error
(Left LED at fiber connectors)
•
Off - No errors, device ready
•
Blinking / On – Transmitter / Receiver communication not established
Link Status
(Right LED at fiber connectors)
•
Blinking – No Fiber cable connection detected
•
On – Transmitter / Receiver communication established, device ready
Figure 7.Video Status LED
DVI Video Status LED
(Green)
•
Off – No video signal detected
•
On – Video signal detected, device ready